Evaluation

Through this SDP it has been quite a different way to work. At the beginning of the project it was quite difficult to split your time between the costume store project and the Breathe project. They were each hugely different projects. The costume store focused more on the beauty of each garment. You focused on how well each garment was constructed and handle. The aim was to create a pristine final piece. Then you had to switch to Breathe which was a completely different way of working all together. With this project you had to focus on problem solving, being creative to make the more experimental designs that we were working with. The emphasis was on the creative aspect of the work not the way in which the garment was constructed.

When we fist came onto the Breathe project I found this at first one of the hardest things to switch into. When I came to create my first cloak I found it very difficult to see the torn up rugged look of the cloaks after working to carefully on aspects of the waistcoat in the costume store.

Looking back over this project I realised I really enjoyed making the waistcoat for the costume store. It was really interesting to work independently from our tutor and discussing as a group how we thought the garment was constructed first. This I feel has developed me as a maker much more than I realised. Being able to loot at garment and work out how it is constructed my self rather than being handed the information was a development stage I needed in my learning process. I feel my confidence has been restored slightly when working on the waistcoat.

When working on the shirt through this project I felt a lot less confident, although it was a lot easier to construct than the waistcoat was, I was still very much in the mind set left over from a previous project ‘Battle for the winds’ I didn’t feel confident in my making skills at all. With only a week to construct the shirt I felt more pushed. Although through the shirt construction it has taught me as a maker it is very important to leave last project when you have completed them and to face the new project with a fresh mind.

Working in the Breathe project I have enjoyed being able to experiment further in textiles. Working with the headdress was something I felt I gained a lot from. Creating the horns enabled me to work with materials I had never worked with before and create something that was costume based but not a piece of clothing. I was got a chance to rediscover the delicate nature of painting. When I first came to paint the horns and especially the rock sash I was rather heavy handed. The paints needed to be built up and graduated and worked into. As a maker I hadn’t had much chance to develop my skills in this way.

Working with expandable foam for the rock sash was very much a development process. The foam itself is perfect for the sash as it is very light once dried yet holds its shape beautifully. Creating the shape of the sash was quite simple. The foam was easily moved to create the right shape and created all the rocky bumps by itself. It was a very time efficient process which was ideal for the project.  However once it had dried to became a rather solid form. If the sash was to be attached to the top of the cloak it would create no movement for the performer. Finding ways to solve constructing problems like this when it is not a normal construction problem has been very interesting and valuable to me as a maker.

 I feel I have learnt so much from this part of my SDP. I have had a chance to try all different ways of creating costumes very effectively and in there way beautifully without the need to be as protective of the work as I had to be in the costume store.

 Overall I have thoroughly enjoyed both projects. It has been very challenging working to your own time scale, being much more independent. For my future working in my final year this has been a valuable learning curve. Being able to know your own limits and how much you can do at one point has been a vital aspect of this project for me.

Breathe: Headdress Reflection:


The head dress was a really fun project to work on. It gave me a chance to work with new materials, new machinery and processes I had never worked with before. This has been a good experience to have as it has broadened my knowledge in the field of costume and given me a chance to be a lot more creative.


With this costume it was very much under pressure to get it done within the day we had set a side to do it in. Being so aware of the time constraint was good pressure to work under as it really focused me on what was needed to be produced in the work shop.
However because it was something very different to produce and create it was fun to get into and very different from everything that I had create in the costume store.


Due to the nature of the breathe project certain considerations needed to be taken into account; the performers would have to be in the costumes for a long time so the head dresses needed to be made as comfortable as possible but yet secure. Elastic was needed under the chin because the horns were to heavy on the hat so made it quite unstable.
I am really pleased with the final head dress. It fits in with the over all costume and finishes the final costume.

Breathe:
Head dress:


The head dress was the last part of the Breathe project I completed. Bethan Francais constructed the example head dress that we followed to create our head dresses. Me and Naomi Bonner worked together to create the headdress so the process didn't take as long to make, this was very important due to tight construction restrictions.
To start we needed to cut out various circle shapes out of blue foam in the work shop. This the base shape we working with to create the horns.
Once the circular shape were cut out the shapes were cut into on a slight angle to make the curve in the horn. Each shape needed to as similar as possible to make the pair of horns as similar as possible.
After the right shapes were cut out a super glue gun was used stick each layer together to create the base horn shape.

First Stage:

Once the horns were at this stage we needed to file down the base shape to create a smoother shape of horns. It didn't need to be perfectly shaped as the beaten weathered look needed to be incorporated into all areas of the costume. Sand and PVA was then painted on top to create the same texture as the sash as it is all for the same finished garment.

Second stage:

This is what the sanded down horn looked like, from this point I needed to layer up the the paint much in the same way as the sash was painted. The colours were slightly different, but the final finish was really effective. Once the base colours were dried the final finish was to brush over very lightly with a gold paint to high light the raised rough sand, it really highlighted the idea of a weather beaten head dress.

Third Stage:

Wire was then placed through the horn so that the wire could be poked through a hat and attached. Once the horns were attached and fully secured plasterzote was used to cover the wire on the inside of the hat and around the rim of the hat to make it a lot more comfortable for the performer to wear. 

Once the horns were in the right place and the hat was made comforatble strips of various fabric were hand tacked onto the hat to decorate the baseball cap. The fabrics used are all the same or in the similar style to the ones that were used in the cloaks to tie everything together.

Final Costume piece:

Breathe: 
Rock Sash:


Another section of this project that needed to be created as part of the first costume was a 3D sash that would be attached to the front of the cloak and then attached to the hip of the base costume.

To create this I needed to be experiment with expandable foam. This is a substance that sticks itself to the fabric and then expands a lot.
As I sprayed the expandable foam onto the calico base fabric I shaped it into a slight curve so it would   curve around the body.
Once it had fully expanded and dried the foam was sanded down to create the weathered worn down look of sea rock.

This is what the base of the sash just covered in sand to give it some extra texture:

Once the sash had dried it needed to be worked into with paints to create the look of rocks. Several different layers of paints were used to build up the right look. The sand made the paint drag across surface which gives its a really good weathered look.
Lighter paints were used to highlight the higher areas.

Below is a final image of the sash:

Once Upon a Tease:


So now the final corset designs have been chosen, our supervisor Naomi Bonner sourced all the fabrics that had been chosen by the company.
A basic pattern was chosen for the 3 light pink corsets, this was then adapted for the individual measurements we had for our dancer.
The full body corsets needed to be draped on the stand separately as they connect all the way under the body so the patterns were made slightly differently.
Having not made a corset since the beginning of uni it was quite interesting to see how much I remember. Due to time constraints we adapted the making of the corset to be easier for us to construct and also change after the fittings.


A week was spent getting the very basics of the corsets put together for a fitting on Friday 11th and  Sunday 13th.

Fitting photos:

 . A lot of gaping at bust

- Seam A: 1.75 off either side from design line

- graduate down to bust line

-Seam B: 1.5 off only one side- side without boning chanel

 . Too much gaping around the hip

- Seam C: take in 3.5 cm either side of hem line and graduate up to waistline 

. Here the boning panels were not attached correctly to the back of the corset- when actually constructing the boning channels in the corset they will sit into pink so the gap will be much further apart.

The model was quite a lot smaller than the corset in places, the shape and fit of a corset is the most important thing to consider when making a corset. These corsets especially as they are being made for a burlesque production need to make the model feel as sexy as possible.

Breathe:
Adaptation Cloak:


The second cloak I needed to produce was to be made from a fur coat that had been provided to the Breathe club already. I had to adapt this coat so that it would fit in with all the other cloaks that were being produced as part of the 'Hunters' collection.

As I had already made the first cloak the second cloak was a much quick process to reproduce. The shape of the original cloak was exactly what was wanted from the design that I was given so the first thing I concentrated on was the surface decoration. The same decoration was used on this cloak as the others so that all the cloaks would link together as a collection yet still retain the individuality of each of the makers.

From the design I had to change the decoration slightly. In the design the netting was only in one section, however when it came to adapting the coat there wasn't enough fur to cut the fur and put in the netting in the middle. After discussions with Kate we decided to add to parts of netting decoration, so there was less fur on the cloak than was originally designed. From an aesthetic point of view this was the only way to make the design work.

On the same way as I did on the first cloak, I used a embroidery foot on a domestic machine to create  circles on the fur to attach the decoration. This was a lot more difficult on this cloak than on the first because the fur was so much thicker so got caught up constantly on the foot.

Another problem with this cloak was the fact the fur was so different and shinny and new it took a while to blend in the two different textures of the netting with the fur. To over come this idea of just a block of netting then a block of fur, I carried on the circles  to decorate into the fur. This with the barnacles added onto the surface made the cloak flow a lot better.

After all the cloaks have been produced as a group we will come together to break down all the final costumes even more to really give the feel of weathered sea hunters.

Second Cloak finished:

Breathe: Adaption Cloak; Reflection:


Again with this section of Breathe it has been really interesting to be able to experiment an be more creative than in some previous projects that we have done.
Adapting the cloak was much more of a problem solving project as I did find it quite hard to get past the initial blocky look of the decoration on the fur as it looked to much like the original coat not like a hunter.
After putting the garment on the stand, I could see were the problem lay with the garment. The front edges of the cloak were far to neat and straight. From here I draped netting along the  front edge of the cloak to break up the front line. This made a huge difference to the final look of the garment.

Also because of the nature of the piece that the cloak would be in arm holes were created in the sides of the garment to make it much easier for the performer to wear and dance in.
A new popper is needed to secure the cloak at the front as the one originally in the garment was far to fiddly and insecure. This will have to be done at a later stage as the poppers could not be sourced at this time. The garments need to be easy for the children to dress them selves in as they will be doing it on their own.